【单选题】Disconnect the tow bar from the vehiclE.
A、将牵引杆连接到车辆上。
B、使用车辆断开牵引杆。
C、将牵引杆从车辆端脱开。
A、将牵引杆连接到车辆上。
B、使用车辆断开牵引杆。
C、将牵引杆从车辆端脱开。
【单选题】Torquemeter displays the output torque available on the propeller shaft.
A、“扭矩计”体现了螺旋桨上可用的输出扭矩。
B、“扭矩计”显示的是螺旋桨轴输出的可用扭矩。
C、“扭矩计”测量了螺旋桨轴上可用的输出扭矩。
A、“扭矩计”体现了螺旋桨上可用的输出扭矩。
B、“扭矩计”显示的是螺旋桨轴输出的可用扭矩。
C、“扭矩计”测量了螺旋桨轴上可用的输出扭矩。
【单选题】You can operate the vehicle after the inspection is completeD. "
A、你可以在检查完成后操作车辆。 "
B、测试完成后可以操作机器。
C、检查完成后可以停止车辆。
A、你可以在检查完成后操作车辆。 "
B、测试完成后可以操作机器。
C、检查完成后可以停止车辆。
【单选题】Label the tabs with section numbers or titles.
A、贴标签于章节编号或标题。
B、在标签上标注章节号或标题。
C、标记所有标签以及章节编号或标题。
A、贴标签于章节编号或标题。
B、在标签上标注章节号或标题。
C、标记所有标签以及章节编号或标题。
【单选题】Make sure the area for test is free of any peoplE.
A、 确保区域测试没有人。
B、 确保测试区域没有人。
C、 确定任何人可以进入考试区域。
A、 确保区域测试没有人。
B、 确保测试区域没有人。
C、 确定任何人可以进入考试区域。
【单选题】In the latter case, the title shall be "Pilot's Operating Handbook.
A、在后面的盒子中,标题应为“机长操作手册”。
B、后一种情况时,标题应为“飞行员操作手册”。
C、后一种情况时,标题应为“机长操作手册”。
A、在后面的盒子中,标题应为“机长操作手册”。
B、后一种情况时,标题应为“飞行员操作手册”。
C、后一种情况时,标题应为“机长操作手册”。
【单选题】伸出或收回起落架不超过这个速度。
A、Do not exceed this speed with landing gear retracted or extendeD.
B、It is not allowed to exceed the maximum speed of the landing gear retraction.
C、Don't extend or retract the landing gear above this speeD.
A、Do not exceed this speed with landing gear retracted or extendeD.
B、It is not allowed to exceed the maximum speed of the landing gear retraction.
C、Don't extend or retract the landing gear above this speeD.
【单选题】润滑升降舵调整片铰链。
A、Lubricate the elevator tab hinges.
B、Lubricant the elevator tab links.
C、Grease the aileron tab hinges.
A、Lubricate the elevator tab hinges.
B、Lubricant the elevator tab links.
C、Grease the aileron tab hinges.
【单选题】逆时针旋转盖子。
A、Turn the cap counterclockwisE.
B、Turn the cap clockwisE.
C、Rotate the cap clockwisE.
A、Turn the cap counterclockwisE.
B、Turn the cap clockwisE.
C、Rotate the cap clockwisE.
【单选题】Make sure that the label fully attaches to the surface and that there are no bubbles.
A、Ensure that the label adheres tightly to the surface and that no bubbles are present.
B、Verify the full attachment of the label to the surface and accept the presence of bubbles.
C、Make sure the label is partially attached to the surface, ensuring there are no bubbles present.
A、Ensure that the label adheres tightly to the surface and that no bubbles are present.
B、Verify the full attachment of the label to the surface and accept the presence of bubbles.
C、Make sure the label is partially attached to the surface, ensuring there are no bubbles present.
发布评论 查看全部评论