【单选题】The metering plug decreases the fuel flow.
A、计量塞增加燃油量。
B、计量塞改变滑油流量。
C、计量塞减少燃油流量。
A、计量塞增加燃油量。
B、计量塞改变滑油流量。
C、计量塞减少燃油流量。
【单选题】Always make sure that you know what you want to say and that the words that you use give the meaning that you want.
A、To know what you want to say and to use the words that give the wanted meaning shall always be assureD.
B、In order to express the meaning that you want, always make sure that you know what you want to say and you use the words.
C、Always make sure that you use what you want to say to express the words with the meaning that you want.
A、To know what you want to say and to use the words that give the wanted meaning shall always be assureD.
B、In order to express the meaning that you want, always make sure that you know what you want to say and you use the words.
C、Always make sure that you use what you want to say to express the words with the meaning that you want.
【单选题】The Specification contains little new material or novel approaches.
A、该规范包括一些新材料或新方法。
B、该规范包含小型的新材料和新方法。
C、该规范几乎不包括新材料或新方法。
A、该规范包括一些新材料或新方法。
B、该规范包含小型的新材料和新方法。
C、该规范几乎不包括新材料或新方法。
【单选题】Compare the two indications.
A、对比两个指示。
B、叠加两个示数。
C、记录两条线索。
A、对比两个指示。
B、叠加两个示数。
C、记录两条线索。
【单选题】Make an analysis of the oil.
A、滑油必须要分析。
B、对滑油进行分析。
C、已经分析了滑油。
A、滑油必须要分析。
B、对滑油进行分析。
C、已经分析了滑油。
【单选题】MAKE SURE THAT THE RODS HAVE SUFFICIENT CLEARANCE.
A、确保杆之间有合适的间隙。
B、确保杆之间有合适的角度。
C、确保杆之间有足够的间隙。
A、确保杆之间有合适的间隙。
B、确保杆之间有合适的角度。
C、确保杆之间有足够的间隙。
【单选题】Plastic covers are fitted into the seat tracks to cover the exposed track sections.
A、座椅小桌板上覆盖了一层塑料,以盖住经过处理的小桌板部分。
B、塑料罩被安装在座椅导轨上,以覆盖暴露的导轨部分。
C、塑料罩被安装在座椅导轨上,以覆盖经过处理的导轨部分。
A、座椅小桌板上覆盖了一层塑料,以盖住经过处理的小桌板部分。
B、塑料罩被安装在座椅导轨上,以覆盖暴露的导轨部分。
C、塑料罩被安装在座椅导轨上,以覆盖经过处理的导轨部分。
【单选题】A smaller damage is permitted without repair.
A、较小的损坏可以不修理。
B、更小的损坏不具备修理条件。
C、一个稍小得损坏允许不带有修理方案。
A、较小的损坏可以不修理。
B、更小的损坏不具备修理条件。
C、一个稍小得损坏允许不带有修理方案。
【单选题】Add the necessary quantity of oil.
A、放出适量燃油。
B、注入大量的滑油。
C、加入所需量的滑油。
A、放出适量燃油。
B、注入大量的滑油。
C、加入所需量的滑油。
【单选题】总数必须在批准的重量和重心限制之内。
A、The total weight must be approved and the CG shall be within the limits.
B、The total weight and CG must be within the specified rangE.
C、Totals must be within approved weight and CG limits.
A、The total weight must be approved and the CG shall be within the limits.
B、The total weight and CG must be within the specified rangE.
C、Totals must be within approved weight and CG limits.
发布评论 查看全部评论